Turbo Jet Surface Aerator 10HP
Liquid waste treatment aerator solution for factories, Turbo Pro Jet Aerator generates direct air in the water in the form of 21% Oxygen which is very good to purify the waste treatment plant in just a matter of weeks.
Function:
- Turbo Pro Jet Aerator produces a very good amount of oxygen to treat wastewater to reduce COD and BOD levels in factory wastewater.
Specifications:
- Power: 10 HP / 380 / 660V / 3phase / 50HZ
- O2 Transfer: 12-14 kg O2 / m3 / m2
- Max Dept: 3.2 - 4.2 meters
- oxydation mixing 200-380 m3
- propeller: 304 stainless steel
- Bussing: 304 stainless steel
- Bussing support: Nylon
- Rotor: 304 stainless steel
- Stator: 304 stainless steel
- Connector: 304 stainless steel
- Flange: 304 stainless steel
- Motor: Electrim
- Floater: Fiber reinforced plastic
Available specifications:
2 HP, 3 Hp, 5 HP, 7.5 HP10 HP
Note:
Turbo Pro Jet Aerator
Turbo Pro generates direct air into deep water in the form of microwaves, with a minimum of 22,500-87,000 liters of air per hour. Such aeration rates are up to 7-8 times higher than traditional aeratorwheels.
The stirring power of the Turbo Pro Jet aerator brings air into the water and mixes at high speed so that the water is full of oxygen.
In addition, Turbo Jet produces up to 21% of the air is oxygen, this process will clean and purify pond ponds in a few weeks.
The current that is generated is up to a depth and distance of up to 35 meters, thus leveling and spreading oxygen throughout the pond pond. The quality of the materials used is very high which gives a resistant effect to corrosiveness or rust from salt water or pollutants.
Hub:
Mr Jimmy
CV.Kencana Jaya Teknik
0852 1707 4040
0878 9889 4040
